70 | Page 2 | Early Classic Enterprises


Shopping cart

0 Items $0.00

Dear Early Classic Enterprises Customers,

Early Classic is excited to announce we have joined the Holley family of brands. To all of our customers, we thank you tremendously for your continued patronage over the last 24 years and moving forward. You will soon be able to find all of your favorite Early Classic products, as well as new ones, at www.holley.com. Keep on Truckin’

Your friends at Early Classic Enterprises

Search Catalog


1971-'87 C-10 Disc Brake Backing Plate Vibration Rings (Pair)

1967-70 C10 Rear Brake Hose

1963-72 Polgraphite 1 ¼" Sway Bar Bushing Set. 

Each kit comes complete with graphite impregnated urethane bushings, new zinc plated mounting straps and hardware.

1971-87 Front Disc Brake Rotor C-10 5-Lug (1 ¼" Thick) Each

1963-72 Front Sway Bar Frame Mount Brackets  for  Lowered applications.

1963-72 C10 Leaf Spring 1½" Drop Shackles 

Until now, GMC and Chevy Truck owners with rear leaf springs have found it next to impossible to find drop rear shackles for their trucks because of the 2¼-inch spring width. Our 1½-inch Drop Rear Shackles solve this dilemma, and also offer an additional drop to our 4-inch rear leaf springs. Our shackles come with Polygraphite Bushings and a durable Black powder coat finish.

1963-72 Rear Axle Saddles  Looking to swap rear ends under your coil spring truck? Our stamped steel Axle Saddles allow you to install any rear end with 3" axle tubes, without having to torch off and re-use the stock saddles. Our weld-on Axle Saddles are exact replicas of the originals, so installation’s a breeze.

1960-72 C10 Panhard & Super Track Bar Bushings 

 (Poly-Graphite Upgrade)

1967-72 L.E.D. Tail Light Insert For Fleetside, Blazer, Suburban and Panel (Pair)

Early Classic now offers Tail Light LED Inserts for the 1967-’72 GM Fleetside Trucks,  Suburbans, Panels and 1969-'72 Blazers that replace the original tail light bulbs with a plug in LED panel. These inserts can literally be installed in seconds using only a screwdriver to remove and re-install the lens. The LED panels are made to fill the inside of the Fleetside, Blazer, Suburban and Panel tail light housing to maximize the effect when the lights are on. The 1967-’72 LED inserts feature 61 individual LED's per panel! Compare that to the small LED replacement bulbs that have a mere 10 LED’s and you will see the difference immediately. Electronic Flasher (04-FLASH) recommended with all LED lights.