Trailing Arms | Early Classic Enterprises

Need help? Call 888-777-0395

Shopping cart

0 Items $0.00

Welcome to Early Classic Enterprises

The premier manufacturer and distributor of quality suspension and restoration components for 1960-1972 GM pickups, blazers, panels and suburbans.

Search Catalog

Trailing Arms

1963-72 Rear Axle Saddles  Looking to swap rear ends under your coil spring truck? Our stamped steel Axle Saddles allow you to install any rear end with 3" axle tubes, without having to torch off and re-use the stock saddles. Our weld-on Axle Saddles are exact replicas of the originals, so installation’s a breeze.

1960-72 Rear Trailing Arm Bushings  (Poly-Graphite Upgrade) 

1960-72 Rear Trailing Arm Bushing Each (Ea) (Stock GM Rubber Replacement)

1963-72 Trailing Arms and Crossmember Kit

With their clean, smooth construction, these one piece Trailing Arm replacements install in the original location without modification. These American-made Trailing Arms are completely TIG welded and powder coated black for a lifetime of rust- free sevice. They are supplied with new U-bolts, coils spring retainer cups, polygraphite bushings, integrated emergency brake cable bracket, and all necessary hardware. 

Also included:

 Early Classic's Extreme Drop Center Crossmember solving several clearance problems associated with 5" or more rear drops. Not only does our unit give your chassis 2.5" more ground clearance, it's raised center hoop design eliminates driveshaft interference on trucks with a slammed stance. This Assembly also provides exhaust passages to allow you to run 3" dual exhaust through the center of your chassis and out of harm's way. This black powder-coated beast has been engineered and fabricated from 1/4" thick Laser-cut and formed steel plate to be stronger and more functional than the factory unit it replaces. As you have come to expect from Early Classic, this component's design also retains factory brake line, fuel line and parking brake cable passages, and is provided with all necessary Grade-8 hardware. (No cutting or welding required.) (Note: Designed for use on short wheel-base, one-piece driveline pickups with 5" drop or more.)

1960-72 Heavy Duty Trailing Arm Kit

With their clean, smooth construction, these one piece replacements install in the original location without modification. These American-made Trailing Arms are completely TIG welded and powder coated black for a lifetime of rust- free sevice. They are supplied with new U-bolts, coils spring retainer cups, polygraphite bushings, integrated emergency brake cable bracket, and all necessary hardware.